Click image to view full size image
Product Description
HX-SZ600-DIM-WP, adopt the most advanced PWM (Pulse Width Modulation) digital dimming technology, especially design for single color led strip. Adopt handheld wireless touch remote control and Wall-mounted touch panel remote control. 5 function buttons and 1 dimming ring in the center, all buttons are in the touch form, and the dimming ring has 128 levels in different brightness value. Particularly, there is a sense light in the remote control center. It shows the exactly light which been touched. As the led strip is the same. Further, there are 3 dynamic modes in the mode button, and the speed is adjustable. In order to achieve the synchronization of more lamps, RGB Amplifier can be used.
Technical Parameters
Working temperature |
-20-60℃ |
Controller supply voltage |
DC5V,12V~24V |
Wall panel supply voltage |
AC90~265V |
0utput |
3 channels |
Connecting mode |
common anode |
External dimension |
L91*W88*H24 mm |
Packing size |
L106*W106*H66 mm |
Net weight |
270g |
Gross weight |
300g |
Output gray |
256 levels （RGB each） |
Output current |
＜8A(each channel) |
Output power |
12V:＜288W, 24V:＜576W |
Frequency of RF remote control |
433.9MHz |
External Dimension
Interface Specifications
Direction for use
Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power；
RF remote control 1:
This product adopts RF full touch control, with one dimming ring and 5 function buttons.
The function of each button as below:
Name of key |
Instruction |
Remarks |
ON/OFF |
ON or OFF in any time |
|
Pause |
Pause or Continue |
|
Mode |
The mode will move to next, when touch the key each time |
3 modes in total. |
Speed/Brightness + |
The Speed/Brightness will +1, when touch the key each time |
Speed for dynamic modes, Brightness for static modes. |
Speed/Brightness - |
The Speed/Brightness will -1, when touch the key each time |
Speed for dynamic modes, Brightness for static modes. |
Color Ring |
Touch any color temperature which you want |
3 modes in total as below:
NO |
Patterns |
Remarks |
1 |
Static 100% light |
Brightness is adjustable, speed is unadjustable |
2 |
flash |
Speed is adjustable, brightness is unadjustable |
RF remote control 1:
This product adopts RF touch wall panel,, with one dimming ring and 5 function buttons.
The function of each button as below:
Name of key |
Instruction |
Remarks |
ON/OFF |
ON or OFF in any time |
|
Pause |
Pause or Continue |
|
Mode |
The mode will move to next, when touch the key each time |
3 modes in total. |
Speed/Brightness + |
The Speed/Brightness will +1, when touch the key each time |
Speed for dynamic modes, Brightness for static modes. |
Speed/Brightness - |
The Speed/Brightness will -1, when touch the key each time |
Speed for dynamic modes, Brightness for static modes. |
Color Ring |
Touch any color temperature which you want |
3 modes in total as below:
NO |
Patterns |
Remarks |
1 |
Static 100% light |
Brightness is adjustable, speed is unadjustable |
2 |
flash |
Speed is adjustable, brightness is unadjustable |
3 |
fade |
RF remote control 3:
Name of key |
Instruction |
ON |
ON in any time |
OFF |
OFF in any time |
Mode |
100% brightness |
Brightness + |
The Brightness will +1, when touch the key each time |
Brightness - |
The Brightness will -1, when touch the key each time |
Color Ring |
Touch any brightness which you want |
Typical Applications
Application Circuit1:
Application Circuit2: （Synchronization function with network Line ）
Notes
1. Supply voltage of this product is DC12V~24V, never connect to others or AC220V.
2. Lead wire should be connected correctly according to grade that connecting diagram offers.
3. This product is not to overload;
4. Warranty of this product is one year, but exclude the artificial situation of damaged or overload working.
Common Problems
Problems |
Possible cause |
Solution |
|
1.Lamp does not light after power |
Power cord is not properly connected, or there is not output switching power supply |
Connect the power cord properly or replay the power |
Lamp power cord is not connected or short circuit |
Connected lighting power cord |
|
2. After connecting some of the load the controller does not work |
The connected load is too large，so that it has burned in some of the components of the controller |
Replace parts of components or replace the controller |
E-mail: 